Free tool

Hydroponic Plant Problems Checker: What Is Wrong With My Plant?

Tap what you see on the plant, answer one or two quick questions, and get the most likely cause, how to confirm it, and what to do next.

14 problemsTwo questions at mostNo signup, no email
An adult hand turning over a lower basil leaf with yellowing between green veins beside herb jars
Step 1

What do you see on the plant?

On this page3 sections
  1. How the checker works
  2. Problems the checker covers
  3. Common questions

How the checker works

Pick the thing you can see: yellow leaves, brown roots, green water, bugs. The checker asks at most two questions that separate the usual causes, the same questions the site’s troubleshooting guides ask, and then shows the most likely cause, a quick way to confirm it and the fix in a few steps.

Most hydroponic plant problems in a small system start in the water or at the roots, which is why the checker so often asks you to read the pH or lift the net cup before anything else.

Every number in the answers, from the pH range to the water temperature, is the same one the guides use. Confirm the cause before you change anything, since one reading settles more than any guess.

Problems the checker covers

Common questions

Can the checker tell exactly what is wrong with my plant?

No tool can see your plant. It narrows what you describe to the most common cause and tells you how to confirm it. If the check does not match, go back and pick the other answer, or read the guide it links.

Why does it send me to check pH so often?

A pH outside the crop’s range locks nutrients out, and a locked-out plant looks hungry even in a full feed. Adding more nutrients then makes it worse, so a pH reading comes before any change to the feed.

What if my plant shows two problems at once?

Start with the roots and the water, since many leaf problems begin there. Fix that, give the plant a few days, then run the checker again for whatever is left.